Fenac rotary encoder 30S
Fenac rotary encoder 30S is used primarily in the Robotics, Marine, Automation and Aviation Industries.
Characteristics:
- Industrial 30 mm special size, servo flange or clamping flange.
- Robust mechanical and electrical construction
- Protection up to IP67
- up to 2500 PPR max
- <350 kHz frequency
Technical information – electrical values:
Voltage supply | 4,75VDC tot 30VDC
of 4,75VDC tot 5.5VDC |
Protection: | Output short circuit protection. Reverse polarity protection ( except 5V version ) |
Consumption w/o load | ≤30mA (24VDC) |
Resolution (steps/turn) | 1…2500 |
Reference signal | Zero pulse, width 90° 180°, 360° optional |
Optoelectronic life time | 100.000 (Min) |
Output frequency |
>200 kHz |
Output signals | 90° shifted A and B, Z + inverted |
Output circuit | Linedriver/RS422 Push-pull short-circuit proof NPN Open Collector |
Interference immunity | DIN EN 61000-6-2 |
Emitted interference | DIN EN 61000-6-4 |
Approval | CE |
Technical data – mechanical design
Dimensions (flange) | 30 mm |
Shaft loading | ≤20 N axial
≤30 N radial |
Protection DIN EN 605229 | IP54, IP67 |
Operating speed | ≤10000 rpm |
Starting torque | ≤0.01 Nm (IP 67) |
Materials | Housing: Stainless steel Flange: Stainless steel Shaft : Stainless steel |
Shaft diameter: | 4, 6, 8 mm (other diameters on request) |
Bearings lifetime: | 109 rev. rev. at 100% of full rated shaft load (minimum) |
Operating temperature | -20…+85°C |
Storage temperature | -30°C up to 90°C |
Weight approx. | 130 g |