Description
Fenac rotary encoder 58B
Fenac rotary encoder 58B are encoders (optical or magnetic) that are used to measure the angular position of a rotating axis in an analog or digital data code.
Characteristics:
- Industry 58 mm Standard Size, Clamping Flange
- Robust mechanical and electrical construction
- Protection up to IP67
- up to 65536 PPR max
- <300 kHz frequency
PPR Options:
1 naar 65.536 – 25 – 50 – 100 – 200 – 250 – 300 – 360 – 400 – 500 – 512 – 600 – 720 – 800 – 900 – 1000 – 1024 – 1250 –
1440 – 2000 – 2048 – 2500 – 3000 – 3600 – 4000 – 4096 – 5000 – 6000 – 8192 – 10000 – 12500 – 16384 – 20000 – 25000
Technical information – electrical values:
| Voltage supply | 4,75VDC tot 30VDC
or 4,75VDC tot 5.5VDC |
| Protection: | Output short circuit protection. Reverse polarity protection ( except 5V version ) |
| Consumption w/o load | ≤60mA (24VDC) |
| Resolution (steps/turn) | 1…25000 up to 65536 |
| Reference signal | Zero pulse, width 90° 180°, 360° optional |
| Opto-electronic life time | 100.000 (Min) |
| Output frequency |
>200 kHz |
| Output signals | 90° shifted A, B and Z + inverted |
| Output circuit | Linedriver/RS422 Push-pull short-circuit proof NPN Open Collector |
| Interference immunity | DIN EN 61000-6-2 |
| Emitted interference | DIN EN 61000-6-4 |
| Approval | CE |
Technical data – mechanical design
| Dimensions (flange) | ø58 mm |
| Shaft loading | ≤120 N axial
≤160 N radial |
| Protection DIN EN 605229 | IP54, IP67 |
| Operating speed | ≤10000 rpm |
| Starting torque | ≤0.025 Nm (IP 67) |
| Materials | Housing: Aluminium Flange: Aluminium Shaft : Stainless steel |
| Shaft diameter: | 6, 8, 10, 12, 14 mm (other diameters on request) |
| Bearings lifetime: | 2x 109 rev. rev. at 100% of full rated shaft load (minimum) |
| Operating temperature | -20…+85°C |
| Storage temperature | -30°C up to +90°C |
| Weight approx. | 250 g |
Questions? Contact us, we are happy to assist you further.
Reviews
There are no reviews yet.