Magnetic rotary encoder AM 58/36
Magnetic rotary encoder AM 58/36 uses magnetic technology and produces up to 12-bit resolution via binary code. The encoders (M36 and AM58 series) can have different signal adjustments, such as incremental, serial interface and commutation.
MECHANICAL DATA:
version | AM58 | AM36 |
Maximum shaft speed | 12000 rpm | 10000 rpm |
Maximum shaft load:
– axial – radial (at shaft end) |
10 N 20 N |
5 N 10 N |
Starting torque at 20 C | < 0.01 Nm | < 0.002 Nm |
Rotor moment of inertia | < 15 gcm2 | < 2 gcm2 |
Protection ( IEC 529) | up to IP67 | up to IP64 |
Maximum weight without cable | 0.25 kg | 0.07 kg |
Operating temperature | -25…+85 OC | -25…+85 C |
Storage temperature | -40…+125 OC | -40…+125 C |
Maximum humidity (non-condensing) | 98 % | 98 % |
Permissible vibration (55 to 2000 Hz) | < 100 m/s2 | < 100 m/s2 |
Permissible shock (5 ms) | < 300 m/s2 | < 300 m/s2 |
ELECTRICAL DATA:
Supply voltage
– standard – optional |
+5V±5% +(10…30)V±5% |
Light source | LED |
Accuracy | ±0.3 arc. degree |
Resolution | 2/12 (4096) |
Code | binary |
Output signals:
– incremental – through synchronous serial interface – commutation |
TTL, HTL SSI UVW (pole number 2, 4, 6, 8, 10, 12, 14, 16) |
Maximum operating frequency, kHz | 300 |
Standard cable length | 1m, without connector |
Maximum cable length | 25m |