Trabiss Coating Thickness Meter CM-8855
Trabiss Coating Thickness Meter CM-8855 is reliable and very accurate.
There are two measuring methods: magnetic induction (F) and eddy current (N).
The F probes measure the thickness of non-magnetic materials (e.g. paint, plastic, copper, zinc, aluminium)
on magnetic materials (e.g. iron, nickle etc.).
It often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, copper tile, aluminium tile, etc.
The N probes measure the thickness of non-magnetic coatings on non-magnetic metals. It is used on anodizing,
varnish,paint, enamel, plastic coatings, powder, etc.
applied to aluminum, brass, non-magnetic stainless steel, etc.
- Can store the new data in 99 groups.
- Two measurement mode: single and continuous
- Metric / Imperial conversion.
- Manual or automatic shut down.
- Auto memory of calibration value, and auto recognize the substrate
- Operation process have buzzing reminder, while no buzzing in continuous mode.
- Use “USB data output”and “RS-232 data output”to connect with PC.
- Bluetooth data output choice
- Integral Type suitable for single-hand operation, large probe with large contact surface have better stability,
users can get continuous, good repetitive and precise measurements.
(notice: continuous mode is convenient to measure the coating thickness of curved objects and tiny objects).
Specifications:
| Operating Principle | F Magnetic Induction & NF Type Eddy Current |
| Measuring Range | 0~1250μm / 0~50mil |
| Resolution | 0.1μm / 1μm |
| Min. Radius Workpiece | F type: convex 1.5 mm / concave 25 mm |
| NF type: convex 3 mm / concave 50 mm | |
| Min. Measuring Area | 6 mm |
| Min. Sample Thickness | 0.3 mm |
| Accuracy | ±1~3%n or ±2.5μm |
| Auto Power Off | √ |
| Operating Conditions | Temp.: 0~40°C |
| Humidity: 10~90 %RH | |
| Metric / imperial | Convertible |
| Power Supply | 2×1.5V AAA Size(UM-4)battery |
| Dimensions | 126x65x35 mm |
| Weight | 81G (not including batteries) |
| Standard accessories | Main unit |
| Probe (F type & N type) Built-in | |
| Calibration Base Sett (F type / NF type) | |
| Calibration Foils ( 1 set, 4 pieces) | |
| Carrying Case B04 | |
| Operation Manual |
Optional accessories:
-
- USB, RS-232C data cable with software.
- Bluetooth data out put with software.
