Trabiss Micro Coating Thickness Meter CM-1210-200F
Trabiss Micro Coating Thickness Meter CM-12120-200F is reliable and very accurate.
The F probes measure the thickness of non-magnetic materials (e.g. paint, plastic, copper, zinc, aluminium) on magnetic materials (e.g. iron, nickle etc.). It often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, copper layer, aluminium layer end paper, etc.
- specially for the thickness measurement of coating on small workpiece
- measuring method: magnetic induction (F)
- two measurement mode: single and continuous (notice: continuous mode is convenient to measure the coating thickness of curved objects and tiny objects)
- metric / imperial system selectable
- manual or automatic shut down
- auto memory of calibration value, and anto recognize the substrate
- operation process have buzzing reminder, while no buzzing in continuous mode
- use “USB data output”and “RS-232 data output”to connect with PC
- provide Bluetooth data output choice
- separate Type, measurements can be more flexibility
Operating Principle | Magnetic Induction (F ) |
Measuring Range | 0~200 um / 0~8 mil |
Resolution | 0.1 um |
Min. Radius Workpiece | convex 2 mm / concave 4 mm |
Min. Measuring Area | 2 mm |
Min. Sample Thickness | 0.1 mm |
Accuracy | 1~3%n of 2.5 um |
Auto Power Off | |
Operating Conditions | Temp.: 0~40° |
Humidity: 10~90 %RH | |
Metric / imperial | Convertible |
Power Supply | 4×1.5V AAA (UM-4)battery |
Dimensions | 140x72x34 mm |
Weight | 215gr (not including batteries) |
Standard accessories | Main unit |
Probe (F type ) | |
Calibration Base Sett (F type ) CTG-BS | |
Calibration Foils CTG-CF ( 1 set, 4 pieces) | |
Carrying Case | |
Operation Manuel |
Optional accessories:
- USB, RS-232C data cable with software
- Bluetooth data output with software