Description
Trabiss Micro Coating Thickness Meter CM-1210-200N
Trabiss Micro Coating Thickness Meter CM-12120-200N is reliable and very accurate.
The N probes measure the thickness of non-conductive coatings on non-magnetic metals. It is used on anodizing, varnish, paint, enamel, plastic coatings, powder, etc. applied to aluminum, brass, non-magnetic stainless steel, etc.
- specially for the thickness measurement of coating on small workpiece
- measuring method: eddy current (N)
- two measurement mode: single and continuous (notice: continuous mode is convenient to measure the coating thickness of curved objects and tiny objects)
- metric / imperial system selectable
- manual or automatic shut down
- auto memory of calibration value, and anto recognize the substrate
- operation process have buzzing reminder, while no buzzing in continuous mode
- use “USB data output”and “RS-232 data output”to connect with PC
- provide Bluetooth data output choice
- separate Type, measurements can be more flexibility
| Operating Principle | Eddy Current (NF) |
| Measuring Range | 0~200 um / 0~8 mil |
| Resolution | 0.1 um |
| Min. Radius Workpiece | convex 2 mm / concave 4 mm |
| Min. Measuring Area | 2 mm |
| Min. Sample Thickness | 0.1 mm |
| Accuracy | 1~3%n of 2.5 um |
| Auto Power Off | |
| Operating Conditions | Temp.: 0~40° |
| Humidity: 10~90 %RH | |
| Metric / imperial | Convertible |
| Power Supply | 4×1.5V AAA (UM-4)battery |
| Dimensions | 140x72x34 mm |
| Weight | 215gr (not including batteries) |
| Standard accessories | Main unit |
| Probe (NF type ) | |
| Calibration Base Sett (NF type ) CTG-BS | |
| Calibration Foils CTG-CF ( 1 set, 4 pieces) | |
| Carrying Case | |
| Operation Manuel |
Optional accessories:
- USB, RS-232C data cable with software
- Bluetooth data out put with software
Reviews
There are no reviews yet.